Promo
![Speedmaster® PCE198.1003 Rear Axle Weld On Billet Housing End 3.500" x 2.375" [Big Ford]](https://d2c5keh8asbas7.cloudfront.net/ProcompElectronics/PCE198+-+Axle+Housing+Ends/PCE198.1003/PCE198.1003_A.jpg)
![Speedmaster® PCE198.1003 Rear Axle Weld On Billet Housing End 3.500" x 2.375" [Big Ford]](https://d2c5keh8asbas7.cloudfront.net/ProcompElectronics/PCE198+-+Axle+Housing+Ends/PCE198.1003/PCE198.1003_B.jpg)
![Speedmaster® PCE198.1003 Rear Axle Weld On Billet Housing End 3.500" x 2.375" [Big Ford]](https://d2c5keh8asbas7.cloudfront.net/ProcompElectronics/PCE198+-+Axle+Housing+Ends/PCE198.1003/PCE198.1003.jpg)
Speedmaster®
Rear Axle Weld On Billet Housing End 3.500" x 2.375" [Big Ford]
Overview
Whether you are narrowing a rear axle housing for bigger tires or just building a new housing for your street car, you will need housing ends to complete your project. These PCE TDS rear housing ends will get the job done, forged from mild steel for ease of welding then fully machined on CNC equipment. This unit is designed to slide over the housing tube for a better weld. For 3" tube diameters.
28 & 31 spline axles:
Requires bearing PCE231.1013
1.377" (35mm) axle shaft
35 spline axles:
Requires bearing PCE231.1006
1.562" (40mm) axle shaft
Specs
| Brand: | PCE |
| Part Number: | PCE198.1003 |
| Part Type: | Axle Housing Ends |
| Housing End Material: | Billet Steel |
| Housing End Finish: | Natural |
| Mounting Holes Diameter: | 1/2 in. |
| Thread Size: | 1/2-13 |
| Housing Style: | Old Style |
| C-Clip Required: | No |
| Quantity: | Sold individually. |
| Notes: | 3.500" x 2.375" Retainer Bolt Pattern |
Prop 65 Warning
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Ratings & Reviews
1 Review
David Miller - | 11/26/2018 8:05:00 pm
Item As Described And Shipped Promptly. Great Transaction. A+
Item As Described And Shipped Promptly. Great Transaction. A+