Speedmaster®
Ford 5.0L Coyote 2pc Fabricated High Ram Air 98mm 4 Bolt EFI Intake Manifold Polished
Overview
The Ford Modular Ram Air Intake Manifold was designed for high-performance applications where induction system height is not limited. Couple this Hi-Ram intake with the high flowing Ford Coyote style cylinder heads has outstanding potential for naturally aspirated and forced induction applications. The runner length and the tapered cross-section were designed to perform well for a wide range of engine configurations.
Specs
Brand: | Speedmaster |
Part Number: | 1-148-054 |
Part Type: | Intake Manifold, Fuel Injected |
Product Line: | Fabricated |
Engine Block Style: | Ford 5.0L Coyote |
Injection Style: | Multi-port |
Basic Operating RPM Range: | Idle-7,000 |
Intake Section Included: | Complete |
Intake Front Height (in.): | 8.50 in. |
Intake Rear Height (in.): | 6.00 in. |
EGR: | No |
Injectors Included: | No |
Fuel Rails Included: | Yes |
Aftermarket Fuel Rail Required: | N/A |
Throttle Body Included: | No |
Throttle Body Bore Diameter: | 98mm |
Supplemental Bosses Cast-In: | No |
Supplemental Bosses Machined: | Yes |
Runners Included: | Yes |
Runners Removable: | No |
Base Material: | Aluminum |
Base Finish: | Polished |
Quantity: | Sold Individually |
Notes: |
Prop 65 Warning
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.