Speedmaster®
Rod End 2" Forged Flex Joint Right Hand RH Thread w/Jam Nut
Product Information
Overview
These flex joints can take consistent punishment. The outer shell of these joints is a single forged steel piece. The inner flex ball is 8620 steel, the washers are heavy duty hardened steel and the bushings are polyurethane. We provide a threaded grease fitting on top and a drilled flex ball for better lubrication plus, each joint includes a jam nut.
Specs
| Brand: | Speedmaster |
| Part Number: | PCE420.1004 |
| Part Type: | Control Arm Upgrade Component |
| Rod End Thread Size: | 1-12RH In. |
| Rod End Attachment: | Male Threads |
| Rod end Construction: | 1-Piece |
| Rod End Style: | Polyurethane |
| Jam Nut included: | Yes |
| Thread Length: | 3.000 in. |
| Rod End Head Bore Size: | 0.430 in. |
| Rod End Head Diameter: | 2.510 in. |
| Rod End Head Width: | 2.190 in. |
| Rod End Centerline Length: | 5.25" |
| Rod End Ball Width: | 2.000 in. |
| Rod End Misalign Angle (Degrees): | 40 degree |
| Rod End Material: | Steel |
| Rod End Finish: | Zinc |
| Quantity: | Sold Individually |
Warranty Information
12-Month Limited Worldwide Warranty
Prop 65 Warning
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Installation Guide
Our AI assistant generates a step-by-step guide for this product — covering installation, maintenance, and troubleshooting.
This AI-generated guide is for general reference only and does not constitute official Speedmaster product documentation. Always verify fitment, torque specifications, and safety requirements before installation.