Speedmaster®
I Beam 6.150" 2.100" .927" Bronze Bush 5140 Connecting Rods Suits: Chevy SBC 350
Specs
| Brand: | PCE |
| Part Number: | PCE274.1114 |
| Part Type: | Connecting Rods |
| Connecting Rod Length Center to Center (in): | 6.150 in. |
| Connecting Rod Beam Style: | I-beam Street |
| Connecting Rod Material: | 5140 Chromoly Steel |
| Connecting Rod Finish: | Shot-peened |
| Wrist Pin Style: | Floating |
| Clearanced for Stroker: | No |
| Cap Retention Style: | Through-bolt |
| Connecting Rod Bolt Brand: | PCE |
| Connecting Rod Bolt Diameter: | 3/8 in. |
| Connecting Rod Bolt Material: | Chromoly steel |
| Fastener Yield Strength (psi): | 200,000 psi |
| Connecting Rod Bolt Head Style: | 12-point |
| Approximate Connecting Rod Weight (g): | 728g |
| Rod Journal Diameter (in): | 2.100 in. |
| Big End Bore Diameter (in): | 2.200 in. |
| Pin End Bore Diameter (in): | 0.927 in. |
| Big End Width (in): | 0.945 in. |
| Advertised Horsepower Rating (hp): | 500 hp |
| Advertised RPM Rating: | 6,000 rpm |
| Weight Matched Set: | Yes |
| Remanufactured: | No |
| Magnafluxed: | Yes |
| Quantity: | Sold as a set of 8. |
| Tool: | Stroker Combinations |
Description
These PCE I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. PCE I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers. PCE cap screw bolts to greatly increase strength and horsepower capabilities.
PCE I Beam Street connecting rods are manufactured from high quality 5140 chromoly steel. The rods are x-rayed and ultrasonically tested with all surfaces shot peened and stress relieved.
Prop 65 Warning
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.