Speedmaster®
H Beam 6.300" 2.250" .927" .890" Width Bronze Bush 4340 Connecting Rods
Promo
Product Information
Overview
Speedmaster H-beam connecting rods are one of the strongest connecting rods available. These rods incorporate a special dowelled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications. Speedmaster H Beam Street / Strip connecting rods are manufactured from aircraft quality 4340 Chromoly steel. The rods are x-rayed and ultrasonically tested with all surfaces shot peened and stress relieved.
Specs
| Brand: | Speedmaster |
| Part Number: | PCE274.1130 |
| Part Type: | Connecting Rod |
| Product Line: | H-Beam |
| Connecting Rod Length Center to Center (in): | 6.300 in. |
| Connecting Rod Beam Style: | H-beam Street/Strip |
| Connecting Rod Material: | 4340 Chromoly Steel |
| Connecting Rod Finish: | Shot-peened |
| Wrist Pin Style: | Full Floating |
| Clearanced for Stroker: | Yes |
| Cap Retention Style: | Through-bolt |
| Connecting Rod Bolt Brand: | PCE |
| Connecting Rod Bolt Diameter: | 7/16 in. |
| Connecting Rod Bolt Material: | Chromoly steel |
| Fastener Yield Strength (psi): | 200,000 psi |
| Connecting Rod Bolt Head Style: | 12-point |
| Approximate Connecting Rod Weight (g): | 702g |
| Rod Journal Diameter (in): | 2.250 in. |
| Big End Bore Diameter (in): | 2.210 in. |
| Pin End Bore Diameter (in): | 0.927 in. |
| Big End Width (in): | 0.890 in. |
| Advertised Horsepower Rating (hp): | 700 hp |
| Advertised RPM Rating: | 7,500 rpm |
| Weight Matched Set: | Yes |
| Remanufactured: | No |
| Magnafluxed: | Yes |
| Quantity: | Sold as a set of 8. |
| Tool: | Stroker Combinations |
Warranty Information
12-Month Limited Worldwide Warranty
Prop 65 Warning
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Installation Guide
Our AI assistant generates a step-by-step guide for this product — covering installation, maintenance, and troubleshooting.
This AI-generated guide is for general reference only and does not constitute official Speedmaster product documentation. Always verify fitment, torque specifications, and safety requirements before installation.